Download the Manual
Peony Range
Infrared Smart Ceiling Heater with Integrated LED Light
Peony infrared ceiling heaters combine efficient radiant heating with integrated LED lighting and smart controls in a sleek, space-saving design. The carbon crystal heating panel emits directional infrared heat that warms people and surfaces directly, while the integrated LED light provides adjustable brightness and warm or cool colour options. With both RF thermostat and Wi-Fi control, Peony provides convenient, programmable comfort for homes, offices and other indoor spaces.
Key Features
• 360W carbon crystal infrared heating panel.
• Integrated LED light with adjustable brightness and warm/cool colour options.
• LED brightness adjustable from L1–L9.
• Smart Wi-Fi control via Smart Life / Tuya Smart app.
• Supplied RF wireless thermostat for temperature control.
• Temperature setting range of 5–50°C.
• 7-day weekly programming with up to 4 heating periods per day.
• ECO mode with open-window detection.
• IP44-rated heater panel.
• Slim 20mm-deep ceiling-mounted design.
• White finish to complement modern interiors.
• Surface temperature reaches up to 110°C during operation.
• Typical heated floor area of 4–8m².
• Designed for indoor ceiling-mounted use only.
• Integrated insulation layer within the heater assembly.
• 1.6m supply cable for fixed wiring connection.
How It Works
Peony uses a carbon crystal heating element to produce infrared radiation that travels directly to people and objects within the effective heating zone. Rather than relying solely on convection to warm the air, infrared energy heats surfaces and occupants directly. These heated surfaces then transfer thermal energy to the surrounding air, helping create balanced indoor warmth.
Smart Heating & Lighting
The supplied RF wireless thermostat acts as both the temperature sensor and control interface for the Peony heater. Set your desired temperature between 5°C and 50°C and the heater will automatically activate when the room temperature falls below the target, then stop once the target temperature is reached.
The thermostat also provides weekly scheduling, allowing up to four independently configurable heating periods per day. The integrated LED light can be controlled separately from the heating function, with warm white, cool white and off settings, plus nine brightness levels.
For additional convenience, the integrated Wi-Fi module allows the heater to be controlled and programmed through the Smart Life or Tuya Smart smartphone app. App functions include remote on/off control, temperature adjustment, weekly scheduling, countdown timer, ECO mode and LED lighting control.
Design & Installation
Peony is designed specifically for ceiling installation, with the heating panel facing downward toward the heated space. Its slim 600 × 600 × 20mm profile provides a discreet installation while combining heating and lighting in a single unit.
The heater must be installed at a minimum height of 1800mm above finished floor level, with the edge of the heating panel positioned at least 200mm from walls or fixed obstructions. The recommended installation height for effective infrared output is approximately 2.2–2.6m.
All electrical installation and connection work must be carried out by a qualified electrician. The Peony is intended for fixed wiring and requires an appropriate disconnection device and protective earth connection. For bathroom and toilet installations, the panel must be installed outside Splash Zone 0 and connected to a dedicated RCD-protected circuit.
Applications
- Living rooms and bedrooms.
- Hallways and domestic spaces.
- Bathrooms and toilets.
- Home offices and commercial offices.
- Retail outlets and reception areas.
- Educational and healthcare facilities.
- Primary or supplementary indoor heating.
Model Specifications
| Model |
Power |
Dimensions |
Weight |
Voltage |
Heating Area |
Installation Height |
IP Rating |
| IHP-360LW5 |
360W |
600 × 600 × 20mm |
3.48kg |
220–240V |
4–8m² |
2.2–2.6m |
IP44 |
Additional Specifications
| Heating Element |
Carbon crystal |
| Surface Temperature |
Up to 110°C |
| Operating Temperature |
Approximately 10 minutes to reach operating temperature |
| Thermostat |
RF wireless thermostat |
| Thermostat Range |
5–50°C |
| Weekly Programming |
7-day cycle, up to 4 periods per day |
| LED Lighting |
Warm white / cool white / off |
| LED Brightness |
L1–L9 |
| Wi-Fi |
2.4GHz — Smart Life / Tuya Smart |
| Finish |
White |
| Cable Length |
1.6m |
| Rated Current |
1.6A |
What's Included
- Peony IHP-360LW5 infrared ceiling heater.
- 4 ceiling mounting brackets.
- 4 plastic wall/ceiling plugs.
- 8 bracket fixing bolts.
- RF wireless thermostat.
- User and installation manual.
ECO Mode
The Peony includes an ECO open-window detection function. When a rapid temperature drop of more than 5°C is detected within a 10-minute period, the heater automatically suspends heating and displays an OP notification. Heating can then be resumed using the thermostat or app.
Care & Maintenance
Peony requires minimal maintenance. Always disconnect the heater from the mains supply and allow it to cool fully before cleaning. Wipe the panel and frame with a soft, non-abrasive, damp cloth. Do not use abrasive powders, metal polish, chlorine-based cleaners or solvent-based cleaning products.
The mounting brackets, fixings, supply cable and connections should also be periodically inspected to ensure they remain secure and in good condition.
Warranty
The Peony ceiling heater panel is supplied with a 2-year warranty from the date of purchase, subject to the manufacturer's warranty terms and conditions. The warranty covers manufacturing defects accepted by the authorised warranty centre.
Warranty coverage may be affected by incorrect installation, use of non-approved mounting hardware, unauthorised modifications or repairs, incorrect electrical connection, mechanical damage or failure to follow the installation and operating instructions.
